| |
| | |

Printer Forum   

 Forgot password?
View: 687|Reply: 2

swintec 4040

[Copy link]

Post time: 2013-5-31 07:37:37 |Show all posts
horz. stepper motor locking up. clean & lubed machine. adjusted carrier cable. tride new motor.
with the motor out of the machine it will lock up on the return with a light amount of presser on gear checked fuses on power supplie. any other ideas.

Post time: 2013-5-31 10:54:46 |Show all posts
Im not sure why but the 4040's I have dealt with have been very sensitive to carrier resisance ( Rails & bushing & pullys need to be totally free, maybe even loosining the carrier cable tension, check the cable pully/spindle shaft for gummyness & make sure card guide is NOT rubbing platen on return, adjust slightly away from platen & any other free movement tricks )
Duane/ JC business

Post time: 2013-5-31 09:36:10 |Show all posts
Its time to check for proper voltage at the power supply.  If OK there, head for the main board.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2021-12-6 13:05 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2021 OASQ.

To Top