| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 191|Reply: 3

konica minolta 1690MF process belt error

[Copy link]

Post time: 2012-11-1 14:14:00 |Show all posts
konica minolta 1690MF process belt error
--Konica Minolta magicolor 1690MF All-In-One Laser Printer

Post time: 2012-11-8 19:07:36 |Show all posts
Something with your developer causing not enough toner. Maybe an auger issue in the developer or in the toner feed itself?

Post time: 2012-11-5 23:53:28 |Show all posts
Hi,C-0206 relates to tray 3.
With the copier turned on do the following
Open paper tray 3, remove paper, close tray, open then shut front door, load paper into tray 3 - hey presto!!
If the fault comes back you could have paper stuck behind the tray or have a defective lift up motor.
Regards
Taminol

Post time: 2012-11-3 03:12:02 |Show all posts
First check the alignment front and rear of the finisher, check the finisher exit guide rollers if the paper is exiting properly,  open both rear and the front cover and check the lower gears attach is the up/down drive belt. that lower gear one might be broken by the pin slot.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-7-23 04:08 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top