| |
| | |

Printer Forum   

 Forgot password?
View: 1039|Reply: 1

hp 4250 says ready but has paper Jan

[Copy link]

Post time: 2015-7-13 13:06:06 |Show all posts
Hi. Originally had crumpled paper in registration. I can print configuration pages then printer goes to ready but there is paper halfway out of registration and under toner. Configuration prints the 3 pages then it feeds
A fourth page tast jams.
Any help is appreciated. Thanks.

Post time: 2015-7-13 14:59:12 |Show all posts
Sounds like a sticking solenoid. The solenoid is located right behind the power switch. After you remove the top and right side covers, it is accessible. One screw holding it in. Remove the top plate and spring (careful not to lose it). Scrape off the gooey residue and replace with some thin sticky back felt. You can find it at a hardware store. The stuff you put on the bottom of furniture legs. When you put the side back on, make sure the switch engages the rod that turns it on and off.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2022-1-24 14:48 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2022 OASQ.

To Top