| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 664|Reply: 2

epson r 300 how to Remove any foreign objects from

[Copy link]

Post time: 2010-1-31 06:47:46 |Show all posts
hi
i keep geting this error but have not got any paper jamed in it
Delete all print jobs and turn the printer off. Remove any foreign objects from inside the printer. After a few minutes, turn the printer back on.
cant get cage too go back to right hend side or runner unless i put it there
has any one had this error or no how to clear it
regards ray

Post time: 2010-1-31 07:58:39 |Show all posts
hi
no i use in free flow ink i ? the sencer has got ink on it
but have cleaned what i think is the sencer but still same
it slides freeley but stops short of its bay
thanks for reply
ray

Post time: 2010-1-31 07:45:59 |Show all posts
When you move the cartridge carriage does it move smoothly without a lot of "play" up / down / side to side / back to front ?
I am thinking that one of the metal bushes either side of the carriage has come adrift. If it has and is the right hand side one, it will be at the end of the carriage bar in the parking area, if the other one then look to the left end of the bar.
It can be refixed by wiping clean and applying a single drop of superglue before wobbling the carriage around so the bush can seated fully home. Be very careful to protect all surrounding parts from the glue.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-4-23 22:49 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top