| |
| | |

Printer Forum   

 Forgot password?
View: 2316|Reply: 10

carrier issue

[Copy link]

Post time: 2013-4-27 18:06:06 |Show all posts
Igen4 gave me the add carrier message. so I did. it backed up to the top....

obviously some sensor is bad?

anyone seen this before, and know a quick trick? i am swamped with work....  

Post time: 2013-4-28 10:34:58 |Show all posts


I was eyeballing it thinking the same thing. but didnt have the guts.

Tech ordered two sensors. One for backup.

Post time: 2013-4-28 08:42:06 |Show all posts
Sometimes it's the circuit board itself causing the problems. My tech showed me how you can tell, but of course I can't remember. One of those things that you need to know only when it happens.

Post time: 2013-4-28 06:45:59 |Show all posts
You can stick a paper clip from terminal to terminal completing the circuit  to get you buy for a few days or so. Just slide it under the connector on the two prongs of the sensor. Or have your tech do it so you do not get in trouble.  I had this issue on my old machine so many damn times.

Post time: 2013-4-28 05:19:22 |Show all posts
Iiiiiiiit's baaaaaaack!!!

new sensor is kaka already. Of course, right when I get a rush job....  I can keep it running by reseating connectors most times, and restarting press others....

new sensor here at 9 am....

anybody else ever experience this? Is it something else?

Post time: 2013-4-28 03:44:47 |Show all posts
You need to check the Intrusive box - Top Left

If you have and it still will not change you will need to run a script to change it or log on as internal


Post time: 2013-4-28 01:59:24 |Show all posts
well... If i log on normal, I can check some values...

but if I log on as psp, I cannot check anything. all of them are there...but nothing happens when I click.


Post time: 2013-4-28 00:54:00 |Show all posts
thanks again.... new sensor is here, looks like it sorted itself out though...

oh, it didnt let me check any boxes... could have just been a software issue i suppose...

not asking questions right now, its running  

Post time: 2013-4-27 23:31:30 |Show all posts
Check the value box.  You won't do any damage as it will start to error with carrier didn't arrive at the dev tanks - then just fill it back up with a couple of bottles


Post time: 2013-4-27 21:32:16 |Show all posts
cool mano! thanks for the tip!!

real quick, which do I check?  min value default?? max is checked on them all....

how long is "too long" to run that way? like what can I screw up by doing this? tech is here, but dealing with the wonders of the highlight color machines....hes ordered a part, but not sure of when it gets here.

Post time: 2013-4-27 19:38:01 |Show all posts
Sensor is knackered.  You can disable the fault in Engineers DC131>Fault Bypass (the message will remain) until a new one is fitted (130K74190)

You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2019-6-17 07:54 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2019 OASQ.

To Top