| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 617|Reply: 3

brother MFC-290C,problem:--PRINT UNABLE 46--,how to reset?

[Copy link]

Post time: 2012-9-16 19:22:21 |Show all posts
brother MFC-290C ,problem:--PRINT UNABLE 46--,how to reset?
--Brother Bredher MFC-290 C Printer

Post time: 2012-9-24 16:44:54 |Show all posts
Hi there,
Well first of all you can try the following steps -
1. Pres 'menu', 'mono start' then 'menu' one by one...
2. Press the arrow up or down to go to 'maintenance 80'.
3. Press 'mono start' several times to go to 'Purge'. Finding the PURGE will show some numeric value which is I assume the number of times the printer had cleaned.
4. Press 'arrow up' key and scroll for number "2" then press "set".Do the same for numbers 7, 8 and 3.
After you have entered this combination, the purge numeric value will be reset to 00000.
Please post comments if further you have the same problem..........
Good Luck!!
Thanks

Post time: 2012-9-21 12:05:20 |Show all posts
Hi there
With some Brother printers you can try this.
Access the internal maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, and then scroll down with the arrow down (round) key. You'll find an entry listed as purge count. If number is over 6000, enter 2 7 8 3.
This will reset the purge count value. Then the printer will restart, hopefully without the annoying cannot clean message.
Some times this happens because of using cheap compatible ink cartridges if this is the case change the ink cartridges.
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Post time: 2012-9-19 10:09:18 |Show all posts
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-4-16 09:10 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top