| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 810|Reply: 3

ar-m277 tryinto install windows 7 no mfp error , can u help

[Copy link]

Post time: 2012-12-12 10:35:35 |Show all posts
ar-m277 tryinto install windows 7 no mfp error , can u help
--Sharp AR-M277 All-In-One Printer

Post time: 2012-12-12 14:29:09 |Show all posts
you may need updated drivers for that. check the support for that printer.

Post time: 2012-12-12 13:15:39 |Show all posts
This code is communication problem between the machine and fax board... The battery on the fax board will need to be replaced.
Usually turning off your machine will make this go away, for awhile.
Sometimes preventing your machine from going into Sleep Mode also helps.
The Fax Battery is much like the CMOS battery in a computer.
A large round thin battery, (much like a watch battery)
To replace this, the fax board has to be removed, The battery isSoldered to the Board, you have to unsolder the battery, then solderthe new battery to the fax board, then reinstall fax board, then setjumpers on fax board. Turn machine on, do some simulation settings, turn machineoff, remove jumper from fax board. Then restart, hopefully you will nothave to reset the county code.
Unless your experienced with this, do yourself a favor and call a tech..

Post time: 2012-12-12 11:58:55 |Show all posts
Sounds like a tough one, take off the back cover and make sure all connectors are making good contact. You may have a fault in the main logic board.
This might need a tech to check out.
Hope that helps...
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2019-8-24 13:23 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2019 OASQ.

To Top