| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 855|Reply: 1

OKI C301dn need firmware --- HELP ---

[Copy link]

Post time: 2015-7-5 12:28:28 |Show all posts
Please help I need to reinstall the firmware on OKI C301dn as I have lost network menu. I will need the firmware for this machine OR if you know that I can use firmware from other model Please reply if possible as this is critical for my work...
Reply to this message or to the below email
THANK YOU IN ADVANCE!!
Ksteel26@gmail.com

Post time: 2015-7-5 14:03:25 |Show all posts
In most cases, if a Network Menu disappears, the Network Card / Network Chip onboard is defective and therefore no longer recognized by the Printer during Power-Up.
Print out all Configuration and Menu Pages and look for anything related to a Network Card. I don't know if it is possible to disable the Network completely in Oki Printers. If so, you should find a Parameter like "Enable Network" somewhere in the Menu.
You should NEVER try to flash your Printer with Firmware for another Model. If you're lucky, the Printer will check the File and block the Update. If you're not, you may end up with a completely dead Printer.
Try another port first, that's what I would do. All Printers i know have either USB or Parallel as a second Port. Try one them before you perform any Flashing Experiments.
Good Luck !
Andreas
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2019-6-27 03:24 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2019 OASQ.

To Top