| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 1884|Reply: 4

Kyocera km-4035 system error C2500

[Copy link]

Post time: 2010-10-9 15:08:50 |Show all posts
please told me about error code C2500 and method to repair
C2500 mean feed motor ?
what way to clear?
Thank a lot

Post time: 2010-12-5 18:53:18 |Show all posts
thank you for your answers

Post time: 2010-11-21 11:57:11 |Show all posts
Tech Bulletin 5 talks about this. That same C2500 can mean feed motor problem or something's wrong with cover switches, like the other posters mentioned.
Vikingmita mentioned the big left cover (switches can be accessed behind the back cover), but I've also seen a copier do this from a bad front cover switch (next to the toner). Simulation U038 can show you if the cover switches work, but it only tests the small plastic switches and not the metal ones that cut power.

Post time: 2010-11-7 05:01:04 |Show all posts
Paper feed motor errorStable OFF is detected for 1 s continuously
after paper feed motor stability.
Poor contact in the
connector terminals.
Check the connection of connector YC11 on
the engine PWB and the connector on the
paper feed motor, and the continuity across
the connector terminals. Repair or replace if
necessary.
Defective drive
transmission system.
Check if the rollers and gears rotate
smoothly. If not, grease the bushings and
gears. Check for broken gears and replace if
any.
Defective engine
PWB.
Replace the engine PWB and check for correct
operation.
Defective paper
feed motor.Replace the paper feed motor

Post time: 2010-10-23 22:04:57 |Show all posts
check switches (called interlock?) on 'main' side door. (yeah, terrible explaination, i know) the bracket might be bent. also had a bad/broken wire from engine/main board to that switch once on one machine.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-4-17 08:13 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top