| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 2164|Reply: 2

Error Code C-3452 on KM- C450

[Copy link]

Post time: 2010-11-7 05:10:30 |Show all posts
I just replaced the fuser unit and this code came up . How to i fix this code
TIA
David

Post time: 2010-12-5 19:02:44 |Show all posts

Different malfunction resetting procedures apply depending on the rank of the trouble code.
* List of Malfunction Resetting Procedures
Trouble Code Rank Resetting Procedures

Rank A • Trouble Reset

Rank B • Opening/Closing the Dront DoorRank C • Turning Main Power Switch OFF/ON
For details of Trouble Reset, see Adjustment/Setting below
------------------------------------------------------
Functions • If the all troubles occur and the status would not be cleared by turning Main Power Switch OFF and ON again, or opening and closing the front door, clear the status of the machine.
-----------------------------------------------------
Use • To be used when the status would not be cleared by turning power OFF and ON again, or opening and closing the front door in case of a trouble.
-------------------------------
Setting / Procedure
1. Turn OFF the Main Power Switch.
2. Turn Main Power Switch ON again while hoding down the Utility/Counter key more than 10 seconds after.
3. Touch [Trouble Reset].
4. Check to make sure that [OK] is displayed below and then it has been reset.
If ok is not there , it will show a different code....
IF it says OK, you should be good to go.
5. Just Turn off the Main Power Switch and turn it on again more than 10 seconds after, and make sure that the machine properly starts.
Hope this helps
Tammy

Post time: 2010-11-21 12:06:37 |Show all posts
Search is your friend.....
Bizhub C351 Error C-3452
Minolta bizhub c450
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-4-20 04:56 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top