| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 449|Reply: 3

Canon MP190 error E5

[Copy link]

Post time: 2012-6-18 14:07:25 |Show all posts
Canon MP190 error E5
--Canon PIXMA MP190 All-In-One InkJet Printer

Post time: 2012-6-22 15:57:16 |Show all posts
When the printer is not functioning properly you may need to reset it:
1) Press and hold  for one second. Display will go blank. (If this does not happen, unplug the printer).
2) Wait approx. 10 seconds
3) Plug in the device - Press  if necessary to power on the printer
4) Wait until the device has finished its startup routine
If the problem still persists, your MP190 may need servicing by a qualified technician.

Post time: 2012-6-21 10:04:33 |Show all posts
Canon printers MP 160 AND MAYBE OTHERS
A) E5, E6 or E4 - it is cartridges error - to fix press the "stop\reset" button for 5-7 sec. and then release
it.
B) E27 - it is code for reset absorber (EEPROM reset or Waste
ink counter reset) and follow the described below
procedure:
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Turn off the printer.( it must be turn off)
then turn it on again.
Only in B) case you can enter into "service mode", in A) case or if have e.g. paper jam, or another error you CAN'T enter
the "service mode"
Try it
Anonymous see A) case: E5, E6 or E4 - it is cartridges error - to fix press the "stop\reset" button for 5-7 sec. and then release
it.

Post time: 2012-6-20 07:18:28 |Show all posts
I have a canon printer MP190. How do I do the reset after completing my ink cartridge to the syringe?
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-7-24 21:41 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top