| |
| | |

Printer Forum   

 Forgot password?
 register
Search
View: 482|Reply: 3

Cannon ipf710 - Hardware Error 03130031-2F13,I get this code after I a

[Copy link]

Post time: 2012-6-15 10:06:14 |Show all posts
Cannon ipf710 - Hardware Error 03130031-2F13 I get this code after I a few seconds of start printing, specially with 24`` x 36`` drawings. Thanks for your help.--Canon imagePROGRAF IPF710 Printer

Post time: 2012-6-22 12:25:19 |Show all posts
This fault occured only when the cartridge motion on the axe faulty,Just clean the positioner plastic film behind the cartridge,clean the axe that cartridge move on with WD 4,"clean the polbearings"

Post time: 2012-6-19 22:10:22 |Show all posts
this code has to do with the carriage lifting position.
You have to check (on the right side of the machine) if a foreign object (paper) is blocking the carriage.
Then Check the encoder wheel and the encoder sensor.
The last you have to check is the motor that operates the lifting motor.

Post time: 2012-6-17 15:58:58 |Show all posts
This error refers to the feed roller sensor not detecting rotation of the feed roller. You will find it at the left end of the roller. It may have come dislodged or just gone faulty. Thats the area to look at.
Srri can't be of more help
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2014-4-22 23:02 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2014 OASQ.

To Top