| |
| | |

Printer Forum   

 Forgot password?
View: 1106|Reply: 3

Brother SX4000

[Copy link]

Post time: 2013-5-31 21:40:40 |Show all posts
Grinds when turned on it homes itself then
types gibberish. Motor?

Post time: 2013-6-1 01:33:55 |Show all posts
If it starts typing on its own it could be a board problem.  Make sure the gears off the motor that spin the P/W are clean.  I agree with Rushmaan, don't put in a lot of time on it!

Post time: 2013-6-1 00:33:23 |Show all posts
Check for bent daizy spoke & Look close at the hammer/motor/clutch to see if it is failing & sticking forward interfering with daisy, also make sure it gets all the way to the left on POR.
Bound for the garbage if not simple fix.
I saved one of these style POS for the right opportunity to drop on to hard floor in front of customer to make a point on how to permantly fix these. Was fun & dramatic ! !

Post time: 2013-5-31 23:21:33 |Show all posts
Check the carrier cable for a broken wire.
You have to log in before you can reply Login | register

Advertise on OASQ.COM| Contact us| Archive| OASQ

2019-6-26 15:14 GMT-8

Powered by Discuz! 7.2

Release 20121101, © 2001-2019 OASQ.

To Top